Sectional Fences

View All Videos

Sectional fence made of corrugated board

A fence made of metal sections is the ideal solution for a cottage or a country house. A high blind fence will reliably protect the site from prying eyes, street noise, and dust. Such a fence does not need to be painted, the corrugated sheet is galvanized, and the top is covered with a polymer composition. The protective and decorative coating is characterized by resistance to moisture, temperature changes, and UV radiation. Due to the corrugated shape, the panels acquire rigidity and resistance to lateral bending loads. The advantages of metal sections include a large selection of coating colors and simple and quick installation. For the construction of fences, posts made of shaped pipes and sections made of corrugated sheets are used. The sections are welded from metal angle bars or assembled from a shape with T-brackets. The shape performs the functions of load-bearing rails and decorative strips. Fasteners are ensured by fixing the T-shape to the supports using self-tapping screws.

Sectional mesh-netting fence

Mesh-netting fences are characterized by accessibility, usability, and durability. The mesh allows light and air to pass freely but at the same time, it is an impassable obstacle for humans and domestic or stray animals. The fence consists of mesh panels and posts with hooks. The posts are made of shaped pipes. After fasteners are welded to them, they are coated with primer enamel and powder coating. Galvanized or polymer-coated mesh is used for the sections. Sections are welded from angle bars or shaped pipes and a mesh is welded to the frame using a steel wire rod. The installation of the fence is completed in several stages. The perimeter of the site is marked and holes are drilled according to the marking, after which supports are lowered into them, and the holes are poured with concrete or backfilled. The finished sections are hung on hooks welded to the supports. The top of the posts is covered with plastic plugs.

Sectional fence made of 3D mesh

Modular welded mesh fence is characterized by strength, wear resistance, durability, and vandal-proof properties. The mesh does not shade the territory and does not interfere with free air circulation. The panels are welded from steel bars. The two-layer coating is resistant to weather, corrosion, and mechanical stress. Thick bars made of alloy steel cannot be broken or bent. There are three horizontal reinforced V-shaped bends on each section, which ensure structural rigidity. The sharp ends of the bars that "decorate" the top of each panel present a serious obstacle for intruders.

Sectional plastic fence

Modular polyvinyl fences are distinguished by a wide range of colors and design options. Sections of such fences are made in the form of solid or openwork panels, pickets, wirework, or checkerwork. High fences enclose the plots; low decorative fences are used for zoning the house territory and protecting front gardens, vegetable and flower beds, and flower gardens. The advantages of sectional plastic fences are weather resistance, wear resistance, durability, simple and quick installation, and the ability to maintain the original appearance throughout its service life. The fence is mounted as follows. First, posts with grooves on the sides are installed. The panel is raised to the height of the support and its edge is inserted into the grooves of the nearby posts and pushed to the very bottom.

Sectional fence made of shaped pipes

Welded panels of such fencing are made of steel pipes with square and rectangular cross-sections. Posts for a sectional fence can be metal, lined with brick, clinker, decorative, or natural stone. Sections are designed with a variety of patterns, from ordinary horizontal bars to complex geometric ornaments. For decoration, elements of forging or capping decoration pieces cast in bronze are used. To cover the front side of the area from dust and noise, it is possible to combine sections made of shaped pipes with polycarbonate, corrugated sheets, or wooden panels. The advantages of modular fencing made of shaped pipes are high protective properties, strength, long service life, a wide range of design options, and high installation speed. Our company accepts orders for sectional fences on a turnkey basis. We are engaged in the design, manufacture, and installation of fences in St. Petersburg and Leningrad Oblast. In our company, you can buy materials from the manufacturer or order the manufacture of sections according to an individual design. We will arrange the delivery of materials to your site and install the fence exactly on time, as specified in the contract. We ensure low prices and guarantees for materials and installation. You can place an order for the calculation of the cost or learn more about the payment terms and deadlines of the order from our consultants.